قالب وردپرس درنا توس
Home / Technology / Install a user interface closed Android Pie beta on Snapdragon Galaxy S8 +

Install a user interface closed Android Pie beta on Snapdragon Galaxy S8 +



Yesterday we wrote a tutorial on how to install an early One UI closed beta construction for the Snapdragon Samsung Galaxy Note 8. In that article, we said that it was currently not possible to update to One UI on either Samsung Galaxy S8 or Samsung Galaxy S8 +. Thanks to the help of XDA Member nochlab1, we were able to find out how to install the first One UI closed Android Pie beta update on the Snapdragon Samsung Galaxy S8 +.

How to install a user interface on Snapdragon Samsung Galaxy S8 + [19659003] The video I posted below will walk you through the process of installing one user interface; I use the Samsung Galaxy Note 9 and Samsung Galaxy S9 + in the video, both of which have official One UI beta available to them, but the same general process will work for the Galaxy S8 + as long as you replace the appropriate files below.

  1. First, download Odin 3.13.1, update.zip for CRK1 to CRL1, update.zip for CRL1 to DRL5 and CRK1 Odin files.
  2. If you have an SD card in your Galaxy S8 +, copy the update.zip to the SD card. If you do not have an SD card, skip this step.
  3. In the Odin files contained in the postal code named SM-G955U_1_20181108095727_feno0ruhgd_fac.zip, you will see six files. Odin has 5 categories, but only 4 will be used.
  4. Put your Samsung Galaxy S8 + in the Odin mode by turning it off and then holding the Power + Volume Down + Bixby button.
  5. Open Odin and click BL, AP, CP, and HOME_CSC then select the corresponding files from the ZIP you downloaded earlier. Don't put anything in userdata. This can delete all the data on the Galaxy S8 +.
  6. Click on start.
  7. Odin will flash the new firmware on the Galaxy S8 +.
  8. Wait 5 to 10 minutes to install the update. Once this is done, turn off the phone and then start the recovery by holding power + Bixby + volume up.
  9. Update now with CRK1 to CRL1 OTA.
  10. Use the volume and power buttons to select "Apply Update from SD card." If you do not have an SD card, go to step 12.
  11. Use the volume buttons to select the update.zip file and the power button for to choose it. The update will then start. The update can take between 2 and 10 minutes. When you finish this step, go to step 13.
  12. If you do not have an SD card, use the volume buttons to select the "Update update from ad" option. Open command prompt on your PC and type:
      adb sideload   <  file location for update .   zip > 

    and press enter. The update begins and should take around 2 to 10 minutes.

  13. Update now with CRL1 to DRL5 OTA.
  14. Use the volume buttons and the power to select "Search update from SD card." If you do not have an SD card, go to step 12.
  15. Use the volume buttons again to select the update.zip file and the power button to select it. The update will then start. The update can take between 2 and 10 minutes. When you finish this step, go to step 13.
  16. If you do not have an SD card, use the volume buttons to select the "Update update from ad" option. Then open a command prompt / terminal on your PC and type:
      adb sideload   <  file location for update .   zip > 

    and press enter. The update begins and should take around 2 to 10 minutes.

  • Restart your phone and enjoy One UI beta.
  • Samsung Galaxy S8 + Forums

    To learn more about Samsung's latest One UI software, we recommend checking out the full review or viewing our video review on the XDA TV YouTube channel.

    Do you want more posts like this in your inbox? Enter your email to subscribe to our newsletter.




    Source link